My OSPF Network Diagram Lab.

14 04 2009

before i start my ospf lab experience, first, i will give you my network diagram. here is the network diagram :

From the picture, the network consist of 8 routers. OSPF area devided into 2 areas, Area 0 (Backbone Area) and then Area 10. And also, there’s consist 4 clients (of course, you can add more client if you have lot of RAM :D ). For simulating client, i’m using cisco router.In this simulation lab, i’m using GNS3 with cisco 3640 (C3640-Ix-Mz_20122-15_20T2.bin).and of course, here’s IP address config for each router :
R1 :

interface Serial0/0
description KONEK_R2
ip address 131.108.1.1 255.255.255.0
serial restart_delay 0
!
interface Serial0/1
ip address 131.108.255.1 255.255.255.252
serial restart_delay 0

R2 :

interface Serial0/0
description KONEK_R1
ip address 131.108.1.2 255.255.255.0
serial restart_delay 0
!
interface Serial0/1
ip address 131.108.255.5 255.255.255.252
serial restart_delay 0

R3 :

interface Serial0/0
ip address 131.108.255.2 255.255.255.252
serial restart_delay 0
!
interface Serial0/1
ip address 131.108.36.3 255.255.255.0
serial restart_delay 0
!
interface Serial0/2
ip address 131.108.255.9 255.255.255.252
serial restart_delay 0
!
interface Serial0/3
ip address 131.108.255.13 255.255.255.252
serial restart_delay 0
!

R4 :

interface Serial0/0
ip address 131.108.255.6 255.255.255.252
serial restart_delay 0
no fair-queue
!
interface Serial0/1
ip address 131.108.36.4 255.255.255.0
serial restart_delay 0
!

R5 :

interface Serial0/0
ip address 131.108.255.10 255.255.255.252
serial restart_delay 0
!
interface Serial0/1
ip address 131.108.128.1 255.255.255.0
serial restart_delay 0
!

R7 :

interface Serial0/0
ip address 131.108.255.14 255.255.255.252
serial restart_delay 0
!
interface Serial0/1
ip address 131.108.129.1 255.255.255.0
serial restart_delay 0
!

Client R5 :

interface Serial0/0
ip address 131.108.128.2 255.255.255.0
serial restart_delay 0
!
!
!
ip route 0.0.0.0 0.0.0.0 131.108.128.1

R4, R6, R8 IP, and another client IP address configuration will be posted tonight. My computer hang because of running lot of router simulation…….hihihihi :D

just wait tonight for my OSPF simulation lab….. OK?? :)

ciaoooooooooo……………..


Comments : Leave a Comment »

Categories : OSPF